Nu-Link2-Pro Features - Nuvoton Nu-Link2-Pro User Manual

Nu-Link2-Pro Features


Supports programming and debugging of all NuMicro

Supports In-Circuit Programming (ICP)

Selectable SWD output voltage (1.8 V / 2.5 V / 3.3 V / 5.0 V)

ICP Programming Tool with image file protection

Drag & drop Flash programming

USB flash drive, SD card and SPI Flash as image file storage

Start button

Automatic IC programming system connector (Control Bus)

Powered by Micro USB or target-powered via SWD interface

Support In-System Programming (ISP)

Via multi-interfaces bridge

Supports PC control ISP

Supports ISP Programming Tool

Supports multi-debug interfaces and tool

Supports Serial Wire Debug (SWD)

Supports high speed up to 96 MHz of Embedded Trace Macrocell (ETM)

Unlimited breakpoint and step execution

Supports Arm DAPLink

Supports PyOCD

Supports multi-interfaces analyzer

2
SPI, I C, CAN and RS-485 signal monitor

Supports Multiple bridge connect

multi-interfaces bridge for ISP function (I

Virtual COM port by USB
Mar. 13, 2020
Nu-Link2-Pro Debugger and Programmer
®
Family microcontrollers
2
C, SPI, CAN, UART, RS-485)
Page 9 of 77 Rev 1.00