Supplement; Technical Data - Vega VEGAMIP T61 Operating Instructions Manual

9 Supplement

9 Supplement
9.1

Technical data

General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting - thread
Ʋ Process fitting - flange
Antenna
Threaded version, internal horn antenna
with PTFE cover
Plastic encapsulated antenna with PP cover -
Horn antenna (316L)
Encapsulated horn antenna with PTFE cov-
er
Mounting adapter "Abrasion protection" (op-
tional)
+80 °C (+176 °F)
Mounting adapter "High temperature" (op-
tion)
+250 °C (+482 °F)
Mounting adapter "High temperature" (op-
tion)
+450 °C (+842 °F)
Materials, non-wetted parts
Ʋ Plastic housing
Ʋ Aluminium die-cast housing
Ʋ Stainless steel housing (precision
casting)
Ʋ Stainless steel housing (electropol-
ished)
Ʋ Seal between housing and housing lid Silicone
Ʋ Inspection window in housing cover
(optional for relay version)
Ʋ Ground terminal
Ʋ Cable gland
Ʋ Sealing, cable gland
Aluminium, stainless steel precision casting and Ex d housing
1)
20
316L
316L
Instrument seal
FKM (A+P 70.16.-06)
Process seal: Klingersil C-4400
FKM (SHS FDM 70C3 GLT)
FFKM (Kalrez 6375)
Process seal: Klingersil C-4400
-
FKM (A+P FPM 70.16-06)
Process seal: Klingersil C-4400
Graphite
Process seal: Klingersil C-4400
Graphite
Process seal, provided by customer
Plastic PBT (Polyester)
Aluminium die-casting AlSi10Mg, powder-coated (Basis:
Polyester)
316L
316L
Plastic housing: Polycarbonate (UL746-C listed)
Metal housing: Glass
316L
PA, stainless steel, brass
NBR
Cover or wetted
materials
PTFE
316L
PP
PTFE
316L
PTFE
Al O
2
316L
Al O
2
316L
Al O
2
316L
1)
VEGAMIP T61 • Emitting unit
ceramic
3
ceramic
3
ceramic
3