Eu Conformity; Radio License For Europe; Radio License For Usa/Canada; Installation And Operation In The Usa And Canada - Vega VEGAMIP T61 Operating Instructions Manual

2 For your safety
6
2.5

EU conformity

The device fulfils the legal requirements of the applicable EU direc-
tives. By affixing the CE marking, we confirm the conformity of the
instrument with these directives.
The EU conformity declaration can be found on our homepage.
Electromagnetic compatibility
Instruments in four-wire or Ex-d-ia version are designed for use in an
industrial environment. Nevertheless, electromagnetic interference
from electrical conductors and radiated emissions must be taken into
account, as is usual with class A instruments according to EN 61326-
1. If the instrument is used in a different environment, the electromag-
netic compatibility to other instruments must be ensured by suitable
measures.
2.6

Radio license for Europe

The instrument was tested according to the latest issue of the follow-
ing harmonized standards:
EN 300440-1 - Short Range Devices (SRD)
2.7

Radio license for USA/Canada

Operation is only permitted if the following two conditions are fulfilled:
•
The instrument must not emit interference radiation
•
The instrument must operate without being affected by incoming
interference radiation, including such that may trigger unwanted
operating conditions.
The instrument is in conformity with the following regulations:
FCC: Part 15 of the FCC regulations
IC: RSS-210 Issue 7, RSS-GEN Issue 2 and RSS-102 Issue 4 of the
IC regulations.
Conversions or modifications of the instrument not expressly ap-
proved by the manufacturer will lead to loss of the approval.
Before use, make sure that the respective approval numbers are
stated on the type label (see chapter "Configuration").
2.8 Installation and operation in the USA and
Canada
This information is only valid for USA and Canada. Hence the follow-
ing text is only available in the English language.
Installations in the US shall comply with the relevant requirements of
the National Electrical Code (ANSI/NFPA 70).
Installations in Canada shall comply with the relevant requirements of
the Canadian Electrical Code.
2.9

Environmental instructions

Protection of the environment is one of our most important duties.
That is why we have introduced an environment management system
VEGAMIP T61 • Emitting unit