Mounting Instructions - Vega VEGAMIP T61 Operating Instructions Manual

Cable glands
Mounting
VEGAMIP T61 • Emitting unit
Metric threads
In the case of instrument housings with metric thread, the cable
glands are screwed in at the factory. They are sealed with plastic
plugs as transport protection.
You have to remove these plugs before electrical connection.
NPT thread
In the case of instrument housings with self-sealing NPT threads, it is
not possible to have the cable entries screwed in at the factory. The
free openings for the cable glands are therefore covered with red dust
protection caps as transport protection. The dust protection caps do
not provide sufficient protection against moisture.
Prior to setup you have to replace these protective caps with ap-
proved cable glands or close the openings with suitable blind plugs.
4.2

Mounting instructions

You can find the mounting instructions for VEGAMIP 61 in the operat-
ing instructions of the receiving unit.
4 Mounting
13