Drive DeVilbiss Healthcare Balanced Air Quick Start Manual

Cleaning Instructions

Cushion

1. Use germicidal soap to wash the cushion.
2. Use wash cloth to wipe the cushion dry. Do not use detergents
or other solvents.
3. Do not machine wash or tumble
4. Do not heat or steam autoclave.
Cover
I
1. Wash at 30°C 86°F
2. Do not iron.
3. For single patient use only.

Repairing Leaks

1. Make sure the cushion and all four corners are inflated
completely.
2. Immerse the over-inflated cushion into water to locate the leak.
You will see air bubbles rising from the area where the leak
3. When the leak has been located, mark the leak by inserting a
toothpick into the hole.
4. Deflate the cushion.
5. Allow the cushion to dry completely,
6. Clean the area around the hole and let the surface dry.
7. Place a patch film over the hole.
8. Press the patch film down firmly to seal. Do not use cushion for
at least 30 minutes.
9. When leak repair is complete, adjust the cushion to proper
inflation according to the user manual.
Patches do not change the performance of the
your patch is not successful in solving the problem, or there is
more serious damage, please contact your local provider.
Drive Medical Ltd,
Ainley's Industrial Estate, Elland, HX5 9JP
4
dry.
is.
then remove the toothpick.
cushion, but if
The Balanced Air
Adjustable Cushion

General Information

1. The Balanced Air cushion is intended to provide
protection and stability while redistributing pressure.
2. The Balanced Air is designed for patients at high risk for
pressure ulcers.
3. Inflate cushion per instructions prior to
4. Do not bend or fold the Balanced Air.
5. If any part of the body touches the cushion base, too much air
has been released, which will reduce the therapeutic effect.
6. Please check the cushion every day to make sure it is fully
inflated so the user will not bottom out.
7. Please store this product and its accessories in a dry
environment.
comfort, skin
use.