HP Aruba 7010 Series Installation Manual page 27

This is a Class A product. In a domestic environment this product may cause radio inferference in
which case the user may be required to take corrective actions.
Taiwan (BSMI)
Regulatory Model Name
The regulatory model name for the 7010 controller is
Proper Disposal of Aruba Equipment
Waste of Electrical and Electronic Equipment
European Union RoHS
restricted materials under the RoHS Directive are Lead (including Solder used in printed circuit
assemblies), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Some Aruba products are
subject to the exemptions listed in RoHS Directive Annex 7 (Lead in solder used in printed circuit
assemblies). Products and packaging will be marked with the "RoHS" label shown at the left indicating
conformance to this Directive.
India RoHS
This product complies with RoHS requirements as prescribed by E-Waste (Management & Handling)
Rules, governed by the Ministry of Environment & Forests, Government of India.
China RoHS
Aruba 7010 Series Controller
Aruba products at end of life are subject to separate collection and treatment in the
EU Member States, Norway, and Switzerland and therefore are marked with the
symbol shown at the left (crossed-out wheelie bin). The treatment applied at end of
life of these products in these countries shall comply with the applicable national
laws of countries implementing Directive 2002/96EC on Waste of Electrical and
Electronic Equipment (WEEE).
Aruba products also comply with the EU Restriction of Hazardous Substances
Directive 2002/95/EC (RoHS). EU RoHS restricts the use of specific hazardous
materials in the manufacture of electrical and electronic equipment. Specifically,
Aruba products also comply with China environmental declaration requirements and
are labeled with the "EFUP 50" label shown at the left.
| Installation Guide
ARNC0103
.
Specifications, Safety, and Compliance |
27