Table of Contents
Advertisement
Getting Started
STEP 3. Install the Network Analyzer Modules
h. For example, white for standard measurement, red for high power, blue
for wide dynamic range and yellow for high gain measurement.
1-24 on page
i. Connect the cables according to connector number as shown in
1-25 on page
coupler M9378A is to the left side of the M9377A (side A) and where
M9378A is on the right side of the M9377A (side B).
Figure 1-25 Jumper Cable Connection Direct Receiver Access Measurement
29.
30. These are connections for both situations, where
30
Figure
Figure
Advertisement
Table of Contents
