Table of Contents
Advertisement
Suitable for the following units; GF1500L, GF1500LST, GF900L, GF900C, GFi350L, PG33, PG36,
IG34, FG38, FG39 GAS LOG FIRES
The control box will only learn the Remote ID codes during the first 30 seconds after power is applied
To the New Owner:
and will ignore this special command from the Remote after the first 30 seconds.
Congratulations! You are the owner of a state-of-the-art Gas Stove by FPI FIREPLACE PRODUCTS INTERNA-
To match the control box to the remote, follow the steps below :
TIONAL LTD. The Regency Gas Series of appliances has been designed to provide you with all the warmth and
charm of a woodstove, at the flick of a switch.
1. Remove a battery from the remote handset.
The models FG38NG2-BRA, and FG38LPG2-BRA of this series has been approved by AGA for both safety and ef-
2. Remove main power to the control box by turning off the isolation switch or switch on the GPO to
ficiency. As it also bears our own mark, it promises to provide you with economy, comfort and security for many trouble
free years to follow. Please take a moment now to acquaint yourself with these instructions and the many features of
your Regency Gas Stove.
3. Wait 30 seconds (approx.).
4. Reconnect main power to the control box.
PAIRING YOUR REMOTE CONTROL
5. Immediately put the battery back in the remote & point the remote in the general direction of the
The control box will only learn the remote ID codes during the first 30 seconds after power
is applied and will ignore this special command from the remote afterward.
6. Press and hold the FAN 1 & FAN 2 buttons simultaneously. The
To match the control box to the remote, follow the steps below:
1. Remove a battery from the remote handset.
7. Release both buttons.
2. Remove main power to the control box by turning off the isolation switch or switch on the
8. The display will revert back to the normal off mode display. The
GPO to the heater.
3. Wait 30 seconds (approx.)
9. Press the Off button on the remote. The heater should turn off.
4. Reconnect main power to the control box.
10. Wait approx. 30 seconds turn the on again & check all the functions
5. Immediately put the battery back in the remote & point the remote in the direction of the
heater.
Note: To view a step-by-step pairing video please visit
regency-fire.com.au/Customer-Care/Fireplace-Care-Videos
6. Press and hold the PROG and FAN buttons simultaneously. The letters "LC" will appear on
the display indicating ID code transmission.
Note: The Remote Control Handset has a set of unique ID codes that is
pre-programmed into its memory. This set of ID codes helps to
7. Release both buttons.
differen-tiate one Remote Control Handset from another so that only
the control box with a matching ID code will respond to the appropriate
8. The display will revert to the normal off mode display. The heater should light - spark, burner,
Remote Control Handset.
etc. - even though the remote screen says the heater is off.
regency.com.au
9. Press the OFF button on the remote. The heater should turn off.
10. Wait approx. 30 seconds to turn the heater on again & check that all functions work - fan
speed and flame height can be adjusted, etc.
Note: To view a step-by-step pairing video please visit
regency-fire.com.au/Customer-Care/Fireplace-Care-Videos
Note: The remote control handset has a set of unique ID codes that is pre-progarmmed into
its memory. This set of ID codes helps to differentiate one remote control handset from
another; only the control box with a matching ID code will respond to a handset.
2
PAIRING YOUR REMOTE CONTROL
the heater.
heater.
letters "LC" will appear on the display indicating the ID codes have
been transmitted.
heater should light – spark, burner, etc even though the remote
screen says the heater is off.
work – fan speed can be adjusted, flame height can be adjusted, etc.
Regency FG38 FireGenie Freestanding Gas Stove
Advertisement
Table of Contents
