3. Connection examples and installation notes
3.1. StarterSet-BASIC
3.2. StarterSet-PRO
1. Follow the steps like described for „StarterSet-Basic".
2. The MultiSensor-Door is added in the configuration similar to a MultiSensor-RF.
Please note the description further down in the manual.
Page
8
1. Connect AlarmManager to PoE enabled switch.
2. Connect MultiSensor-RF to KIO2 power adapter
and power plug.
3. Enter Kentix-Default-IP-Address
(192.168.100.222) into your web browser.
4. Enter default user (admin/password) and click
Login (pay attention to your own IP settings)
5. Adjust IP address of AlarmManager in settings.
6. Add wireless sensor in dashboard.
7. Make own individual settings.
(07-2018, subject to change)
KMS-DOOR
kentix.com