Table of Contents
Advertisement
6.6.6. System
Logbook
Regardless of the event log, all messages relevant to the functionality of the Kentix system are stored here. For
example, the logbook contains messages about logging in to the MultiSensor, configuration changes, and alarm
notification messages.
With the help of the logbook possible misconfiguration can be understood.
System functions
In the section System functions a backup of the configuration can be created and restored.
In addition, a firmware update can be performed here.
Firmware updates are available for download from the Kentix website. For a description of how to perform
firmware updates, see later in this guide.
Wireless settings (ZigBee - MultiSensor-LAN-RF)
This section displays information about the current ZigBee wireless network. In addition, the radio channel can
be changed here and the radio network can be reset.
NOTICE!
If the radio channel is changed, it may be necessary to re-teach some sensors.
When the radio network is reset, re-teaching all wireless sensors connected to the AlarmManager is necessary.
SD card
To record video images in the event of an alarm, an SD card must be inserted in the MultiSensor LAN.
The card is automatically recognized after insertion and can be formatted here if required.
A previous deletion or adjustment of the file system is not required. SD cards with a memory size of up to 128
gigabytes can be used.
Page
34
(07-2018, subject to change)
kentix.com
Advertisement
Table of Contents
