Wi-Fi Setup; Scan Networks; Use Ios Device - Denon AVR-X6700H Owner's Manual

Contents Connections

Wi-Fi Setup

Connect to a wireless LAN (Wi-Fi) router.
The router can be connected in the following ways. Select the connection
method to suit your home environment.
o Scan Networks
Select the network you wish to connect to from the list of possible
networks shown on the TV screen.
1. Select the network you wish to connect to from the list of wireless
networks.
Select "Rescan" if the network cannot be found.
2. Enter your password and select "OK".
Front panel Display
Playback Settings
o Use iOS Device
Use your iOS device (iPhone/iPod/iPad) to connect to the network. By
connecting your iOS device to this unit using Wi-Fi, the unit can be
automatically connected to the same network as your device.
1. Select "Use iOS Device" on the TV screen.
2. Check that your iOS device is connected to the wireless LAN (Wi-
3. Tap "Next" on the screen of the iOS device.
0 The iOS device firmware version needs to support iOS 7 or later.
262
Rear panel
Tips
Fi) router and select "Denon AVR-X6700H" from "SET UP NEW
AIRPLAY SPEAKER..." at the bottom of the Wi-Fi configuration
screen of your iOS device.
Remote Index
Appendix