Subwoofer Level Error Message And How To Adjust - Denon AVR-X6700H Owner's Manual

Contents Connections
o Subwoofer level error message and how to
adjust
The optimal level of each subwoofer channel for Audyssey
measurement is 75 dB.
During subwoofer level measurement, an error message is displayed
when one level of subwoofers is outside the 72 – 78 dB range.
When using a subwoofer with built-in amplifier (active type), adjust the
subwoofer volume so that the subwoofer level is within the 72 to 78 dB
range.
G Error message H
Audyssey Setup
Your Subwoofer 1's level is too high.
If your subwoofer has a volume control on it,
select "SW Level Matching" to interactively adjust the level of
your subwoofer.
If your subwoofer does not have a volume control,
or if you do not want to use a subwoofer, select "Skip".
Back
Front panel Display
Playback
® Setup
Skip SW Level Matching
Rear panel
Settings
1
Select "SW Level Matching" and then press ENTER.
2
Adjust the volume control on your subwoofer so that
the measured level is within the 72 to 78 dB range.
3
When the measured level is within the 72 to 78 dB
range, select "Next" and then press ENTER.
If you use two subwoofers, the second subwoofer's adjustment
0
will be started. Repeat the operation from step 2, 3.
236
Remote
Tips Appendix
Index