Bi-Amp Connection; 9.1-Channel Playback (Bi-Amp Connection Of Front Speakers) - Denon AVR-X6700H Owner's Manual

Contents Connections

Bi-amp connection

o 9.1-channel playback (bi-amp connection of front speakers)
This system plays back 9.1-channels. You can use the bi-amp connection for front speakers. Bi-amp connection is a method to connect separate
amplifiers to the tweeter terminal and woofer terminal of a speaker that supports bi-amplification. This connection enables back EMF (power returned
without being output) from the woofer to flow into the tweeter without affecting the sound quality, producing a higher sound quality.
FHL
FL
(Bi-Amp)
SW
SL
SBL
NOTE
0 When making bi-amp connections, be sure to remove the short-circuiting plate or
wire between the speaker's woofer and tweeter terminals.
Front panel Display
Playback
FHR
FR
(Bi-Amp)
C
SR
SBR
Rear panel
Settings
FRONT FRONT CENTER SURROUND
C
SW
(R)
q w
FR
z The height speakers, ceiling speakers and Dolby Atmos Enabled speakers can
be connected to the HEIGHT1 speaker terminals. Set the speaker to be
connected from "Height" - "Layout" in the menu. (v p. 242)
73
Remote
Tips Appendix
SURROUND SURROUND BACK SURROUND BACK HEIGHT1 HEIGHT1
ASSIGNABLE ASSIGNABLE
SPEAKERS
SR SL SBR SBL FHR FHL z
(L)
q w
FL
Index
ASSIGNABLE ASSIGNABLE
ASSIGNABLE
z