Example Connection For The Auro-3D 9.1-Channel System - Denon AVR-X6700H Owner's Manual

Contents Connections
o Example connection for the Auro-3D 9.1-channel system
This speaker configuration is optimized for Auro-3D playback.
FHL
SHL
FL
SW
SL
0 Set "Floor" to "5ch" or set "5ch & SB" and "Height Sp" to "4ch" in the menu when
connecting in this configuration. (v p. 240, 241)
Next, set "Height" - "Front Layout" to "Front Height & Surr. Height". (v p. 243)
Front panel Display
Playback
FHR
SHR
FR
SR
C
Rear panel
Settings
FRONT FRONT CENTER SURROUND
SW FR FL C SR
z1 You can change the combination of the HEIGHT1 and HEIGHT2 channels in
the settings. (v p. 70)
z2 For the best Auro-3D experience Surround Height speakers are
recommended, however you may substitute Rear Height speakers from a
Dolby Atmos speaker setup in place of Surround Height speakers.
60
Remote
Tips Appendix
SURROUND SURROUND BACK HEIGHT1 HEIGHT1 HEIGHT2
ASSIGNABLE ASSIGNABLE
SPEAKERS
SL FHR FHL SHR SHL
z 1
HEIGHT 1 HEIGHT 2
Index
ASSIGNABLE
HEIGHT2
ASSIGNABLE
z 1 z 2