Floor - Denon AVR-X6700H Owner's Manual

Contents Connections
o Speakers for ZONE2 / Speakers for ZONE3 /
Speakers for ZONE2/3 / Speakers for Bi-Amp /
Speakers for 2ch / Speakers for Front B
When "Assign Mode" is set to "9.1ch + ZONE2", "9.1ch + ZONE3",
"9.1ch + ZONE2/3-MONO", "7.1ch + ZONE2/3", "9.1ch (Bi-Amp)" or
"9.1ch + Front B" in the menu, select the speaker terminal from which
to output the channels to which the internal amplifier is assigned.
(v p. 238)
HEIGHT 1:
HEIGHT 2:
HEIGHT3/FRONT WIDE
(Default) ：
Front panel Display
Playback
The assigned channels are output from
the HEIGHT1 speaker terminals. The
height, ceiling, and Dolby Atmos Enabled
channels cannot be used.
The assigned channels are output from
the HEIGHT2 speaker terminals. Up to
one set of height, ceiling, and Dolby
Atmos Enabled channels can be used.
The assiend channels are output from the
HEIGHT3/FRONT WIDE speaker
terminals.
Two sets of height, ceiling and Dolby
Enabled speakers can be used.
Front wide speakers cannot be used.
Rear panel
Settings
o Floor
Select the floor speakers location.
5ch & SB & FW:
5ch & SB
(Default):
5ch & FW:
5ch:
240
Remote
Tips Appendix
This layout combines a surround back or
front wide speaker with the basic 5-
channel layout.
This layout combines a surround back
speaker with the basic 5-channel layout.
This layout combines a front wide
speaker with the basic 5-channel layout.
This is a basic 5-channel layout that uses
front speakers, center speakers and
surround speakers.
Index