Audio Setup; Fj 2Ch Direct/Stereo; Ext. In Subwoofer Level; Dolby Digital Setup - Denon AVR-2309CI Owner's Manual

ENGLISH
We recommend setting to "+ 15dB".
• Menu screen •
[Selectable items] OdB +5dB +10dB
I
+15dB
I
fl2ch Direct/Stereo
Make speaker settings for 2-channel mode playback.
Do not memorize settings. Surround mode does not change
according to input signal.
OFF
• Set this to "ON" if the sound from the front speakers seems
distorted .
• When not using the center speaker or surround speakers, the
playback sound is down-mixed and output from the front speakers.
II
Dolby Digital Setup
Set dynamic range for downmix playback of Dolby Digital
sources.
[Selectable items]
II
Auto Surround Mode
Make setting for memorizing surround mode setting for each
input signal type.
ON
Compression is used. Select this if sound from front
speakers is distorted.
~:
Do not use compression. This is the recommended
setting.
[Selectable items]
~:
Memorize settings. Most recently stored surround mode is
automatically selected.
Select subwoofer use.
Subwoofer
Front
Crossover
Select low range signal to be reproduced by subwoofer.
[Selectable items]
~
LFE+Main :
Select subwoofer signal
Select crossover frequency from which subwoofer handles low range
signal.
[Selectable items]
~
No :
Select subwoofer use.
Subwoofer Mode
[Selectable items]
40Hz 60Hz 180Hz 190Hz 100Hz 110Hz 120Hz 150Hz
200Hz 250Hz : Select crossover frequency.
Select front speaker size.
[Selectable items]
I
Large
I
Small : Select front speaker size.
2-3.Audio Setup
IT 1. EXT. I N SW Level
2. 2ch Direct/Stereo
3.Dolby Digital Setup
4. Auto Surround Mode
5. EQ Preset
2. Manua I Setup
1. Speaker Setup
2. HDMI Setup
IT3. Aud i
0
Setup
4. ZONE2
Se
t
up
5.0ption Setup
D
EXT. IN Subwoofer Level
Set the subwoofer level for playback.
Audio Setup
Make settings for audio playback
I
Setting
To change the settings, select "Custom".
[Selectable items]
I
Basic
I:
Use the same settings as in "Speaker Setup".
Custom : Make separate settings for 2-channel mode.
Distance FL
Set distance from listening position to front left speaker.
[Variable range] O.Oft - 6O.Oft
Distance FR
Set distance from listening position to front right speaker.
[Variable range] O.Oft - 6O.Oft
-N'U-
Set the distance between the listening position and the various
speakers to no more than 20.0 ft (6.00 meters).
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of Input signals
listed below.
CD
Analog and PCM 2-channel signals
(1) Dolby Digital and DTS 2-channel signals
CIl
Dolby Digital and DTS multi-channel signals
®
Multi-channel signals other than Dolby Digital and DTS (PCM,
etc.)
• When playing in the PURE DIRECT mode, the surround mode does
not change even if the input signal is changed.
33
I
For details on how to select, set and cancel settings for each menu, see "Menu Operations" (D2Fpage 22).