3Ru Fan Tray - Barco Event Master E2 Series User Manual

S3 Maintenance
How to remove the Front Brackets
1. Remove the two front brackets by lifting them up and then pulling them inwards and then out.
Image 15-14
How to install the Front Brackets
To install the front Brackets follow the same procedure in the reverse order.

15.9 3RU Fan Tray

Flow chart
Image 15-15
Concerned parts
R767280K 3RU Fan Tray
Necessary tools
1 x Phillips Screwdriver #2 (optional).
How to remove the 3RU Fan Tray
1. Loosen and unscrew the 4 thumbscrews holding the 3RU fan tray to the chassis.
Note: You may need a screwdriver if the thumbscrews are very tight.
2. Pull the tray out.
Note: You need to tilt the tray and maneuver it to go around the dimples located on the side of the
chassis.
456 R5905948 /12 Event Master Devices