Table of Contents
Advertisement
9
Operation
Operation is carried out via the control element of the Split Unit Gateway in the Web-based user
interface of the System Access Point or in the free@home app.
Fig. 15:
Control element in the Web-based user interface of the System Access Point
[1] Switching the actuator on/off via the button
[2] Call-up or closing the control element of the actuator via the arrow button (only visible in the panel
configuration)
[3] Selection of the Split Unit operating mode:
– Automatic
– Heating
– Cooling
– Ventilation
– Drying
[4] Setting the setpoint temperature via the -/+ buttons. When the limit value of the specified
maximum/minimum setpoint temperature is reached, the -/+ characters are faded in or out.
[5] Setting the fan speed level via the -/+ buttons. Three fan speed levels are supported.
[6] Enable or disable Silent Mode (not visible in the Figure)
[7] Enable or disable the slat adjustment horizontal and vertical
Product manual 9AKK107680A2816
1
2
3
4
5
6
7
Operation
│33
Advertisement
Table of Contents
