Table of Contents
Advertisement
Identification via the identification button
Notice
You can carry out the identification via the identification button only if you have
authorization for direct access to the Split Unit Gateway.
1. Press the identification button on the Split Unit Gateway.
–
The dentification LED lights up.
–
The software indicates the device that is being switched.
Assigning a name
Fig. 10:
Assigning a name
2. Enter a name that is easy to understand and under which the application is to be displayed
later, e.g. "Gateway living room".
–
The name can be changed in the list view of the device later at any time.
3. Press the tick at the bottom right.
This takes over the entry.
Product manual 9AKK107680A2816
Commissioning
│26
Advertisement
Table of Contents
