Table of Contents
Advertisement
Cleaning and care
Cleaning the front of the
appliance and the side panels
If soiling is left on for any length of
time, it may become impossible to
remove. Surfaces may suffer
discolouration or damage.
Therefore it is best to remove soiling
from the appliance doors and side
panels immediately.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or
discolour the surfaces.
See the information on "Cleaning
agents" at the beginning of this
section.
Clean the surfaces with a clean
sponge and a solution of warm water
and washing-up liquid. A clean, damp
microfibre cloth without cleaning
agent can also be used.
After cleaning, wipe with clean water
and dry with a soft cloth.
36
Stainless steel appliances
The appliance front has a special high-
quality coating (CleanSteel). It is
resistant to soiling and easy to clean.
Do not use stainless steel
cleaning agents on these surfaces.
They will damage the coating.
Cleaning the ventilation gaps
A build-up of dust will increase the
energy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example). A build-up of
dust will increase the energy
consumption of the appliance.
Advertisement
Table of Contents
