Table of Contents
Advertisement
Cleaning and care
Cleaning the front of the
appliance and the side panels
If soiling is left on for any length of
time, it may become impossible to
remove. Surfaces may suffer
discolouration or damage.
Therefore it is best to remove soiling
from the appliance doors and side
panels immediately.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or
discolour the surfaces.
See the information on "Cleaning
agents" at the beginning of this
section.
Clean the surfaces with a clean
sponge and a solution of warm water
and washing-up liquid. A clean, damp
microfibre cloth without cleaning
agent can also be used.
After cleaning, wipe with clean water
and dry with a soft cloth.
CleanSteel (edt/cs) – appliance front
Risk of damage due to incorrect
cleaning.
The surface coating will be
damaged.
Do not use a stainless steel
cleaning agent on this surface.
The appliance front has a high quality,
special finish. It is resistant to soiling
and easy to clean.
66
Cleaning the door seal
Risk of damage due to incorrect
cleaning.
If you treat the door seals with oils or
grease, they can become porous.
Do not use any oils or grease on the
door seals.
The door seal should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the
energy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele Vacuum Cleaner dusting
brush, for example).
Advertisement
Table of Contents
