Miele K 28202 D w Operating And Installation Instructions page 42

Problem solving guide
Other problems
Problem
An alarm sounds.
An LED indicator light is
flashing at the back of
the appliance at the
bottom near the
compressor (depending
on model).
The electronic unit for
the compressor is
equipped with an
operation and fault
diagnosis LED indicator
light.
The external walls of
the appliance feel
warm.
The door seal is
damaged and needs to
be replaced.
The floor of the
refrigerator is wet.
42
Possible cause and remedy
The door alarm has been activated.
 Close the appliance door. The alarm will stop.
The indicator light flashes several times every
5 seconds.
A fault has occurred.
 Call Miele.
The indicator light flashes regularly every
15 seconds.
Not a fault. This flashing is normal.
This is not a fault. The heat which results from the
cooling process is used to avoid the build-up of
condensation on the appliance.
No tools are required to change the door seal.
 Change the door seal. A replacement is available
from Miele.
The condensate drain hole is blocked.
 Clean the condensate channel and drain hole.