Miele K 28202 D w Operating And Installation Instructions page 54

Changing the door hinging
Changing over the lower hinge
plate
 Pull the hinge pin  complete with
washer  and adjusting foot 
upwards to remove.
 Remove the stopper .
 Undo the screws  and remove the
hinge plate .
 Slightly loosen the screw of the door
closing aid  on the hinge plate .
Place the door closing aid  in the
opposite mounting hole in the hinge
plate and then tighten the screw.
 Insert the stopper  into the other
hole.
 Remove the cover .
54
 Remove the screw  and screw it
into the outside hole on the opposite
side.
 Turn the cover  180° and refit it in
the holes on the opposite side.
 Screw the hinge plate  securely into
position on the new hinge side with
the screws .
 Reinsert the hinge pin  complete
with washer  and adjustable
foot . Important: The lug on the
hinge pin must point to the back
again.
 Place the door onto the hinge pin 
from above.
 Close the appliance door.