Advertisement
10. Loosen screw on developing unit. (***Screw will not come all the way out***).
Swing lever one down.
Remove developing unit.
Cover drum with a piece of paper.
CAUTION: Do not tip unit. Keep it level.
11. Clean the two mirrors that sit above the developing unit (mirror 5 and 6).
12. Reinstall developing unit (tighten screw).
13. Swing toner hopper to the left and reinstall screw.
14. Swing lever 1 up.
15. Close front cover.
16. Confirm copier operation and copy quality.
- 4 -
Advertisement
