Advertisement
22. Reinsert the Cleaning Blade. The Cleaning Blade is properly positions when the black
tabs in the Drum unit are through the upper holes on the cleaning blades installation
plate. Caution: Do not force the blade into place. If the black tabs break, proper
cleaning blade installation is not possible.
23. Reinsert the Developer Unit (2 screws).
24. Reinsert the Charge Corona Unit (2 screws and 2 connector).
Caution: Confirm no wires are pinched.
25. Reinsert the Drum Unit into the copier (1 screws).
26. Put on Knob 3.
27. Return Lever 1 into the up position.
28. Close front door.
29. Reset Drum Count (Refer to How to Reset Drum Count).
30. Confirm copier operation and copy quality.
- 16 -
Advertisement
