Control Of The Grill Burner; Convection Mode; Switching On The Grill Gas Burner; Switching Off The Grill Gas Burner - LG LF98V10S Operating Manual

USE OF YOUR PRODUCT

Control of the grill burner

Please note that the appliance door must be closed during grilling.

Switching on the grill gas burner

1. Open the appliance door.
2. Press the control knob for the grill and turn it anti-clockwise to position (maximum position).The
gas burner ignites.Keep the control knob pressed for a few seconds until the flame stabilises.Do not
turn the knob beyond this setting.
3. Adjust the burner to the desired flame setting. The flame is not steady between position (closed
position) and (maximum position) Therefore, always select a position between (maximum and
minimum).
4. Carefully close the appliance door.

Switching off the grill gas burner

When the dish is ready, turn the control knob clockwise to position (closed position) .
If the flame goes out
Switch off the control knob. Wait one minute and switch the burner on again.
!
If the flame goes out, gas will escape. Never leave the gas burner unattended during
operation. Ensure that there are no draughts.
Convection Mode (If Your Appliance Is Equipped With Fan)
In convection mode, the fan situated at the back of the oven compartment creates horizontal
forced-air circulation.
The advantages of convection cooking is uniform distribution of heat
throughout the oven cavity (meat no longer needs to be turned while
roasting).To activate the convection fan use the button placed on control
panel. Pre-heating the oven is not necessary in this function. For delicate
pastry baking, it is recommended to heat the oven before inserting the
pastry trays.
(If available)
9