Table of Contents
Advertisement
3.
Remove the WWAN module (3) by pulling the module away from the slot at an angle.
NOTE:
Reverse this procedure to install the WWAN module.
Solid-state drive
Table 5-4
Solid-state drive spare part information
Description
Before removing the solid-state drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
44
Chapter 5 Removal and replacement procedures
WWAN modules are notched to prevent incorrect installation.
Spare part number
Hide quick links:
Advertisement
Table of Contents
