Operation; Button Assignment - ABB TC16-20 Series Product Manual

8

Operation

8.1

Button assignment

Fig. 11: Button assignment for operation / setting
Designation
1 UP
2 OK
3 DOWN
4 BACK
Table 2: Button assignment for operation
Product manual 2CKA001473B9664 │ 01.03.2020
1
4
3
Function
Standard modes "AUTO", "OFF", "ECO" and "Comfort":
■
– Set point for the temperature can be adjusted
Programing mode:
■
– mode selection
Programing mode:
■
– Displayed values can be adjusted:
– Short press: First digit single step change
– Longer press >1 sec: First digit changes step by step with
– A frequency of 5 Hz until 5 or 0 is reached, then the step value
is increased to be 5.
With the OK key, the value of a flashing display is confirmed and next
■
parameter appears.
Programming must be confirmed completely.
■
If you press > 0.6 seconds in a standard mode
■
– The selection of the standard modes "AUTO" "OFF" "ECO" and
"Comfort" appears and the mode can be adjusted.
– Selection with the keys Λ V and confirmation with OK
If you press < 0.6 seconds in a standard mode the start times for the
■
current day are displayed.
Same functions as UP (1)
■
From a standard modes "AUTO" "OFF" "ECO" and "Comfort" to
■
programming mode and backwards.
Furthermore, this button can be used to get one level back in the
■
menu.
2
OK
Operation
│20