Fig. 5:
Connecting the cables
Fig. 6:
Mounting the flush-mounted insert
Fig. 7:
Mounting the attachment
Product manual 2CKA001473B9664 │ 01.03.2020
Connection, installation / mounting
1. Connect the cables to the flush-
mounted insert.
–
For the connection assignment,
see chapter 6.3 "Electrical
connection" on page 16.
2. Mount the flush-mounted insert.
3. Plug the attachment together with the
cover frame onto the flush-mounted
insert.
–
Ensure that the plug-in
connection on the rear side does
not get jammed.
–
If mounting is difficult, check
whether a burr has formed at the
lock-in openings of the flush-
mounted insert and remove it.
The device is now mounted.
│15