Set Start Times - ABB TC16-20 Series Product Manual

8.3.3

Set start times

The start times are starting Comfort- mode and the ECO-mode via a block or individual
programming.
Start times can be adjusted in steps of 10 minutes.
■
Start times can be deleted.
■
– To delete a specific start time, all 4 buttons must be pressed at once during the relevant
start time is displayed.
The difference of time between two starting times is at least half an hour.
■
2 or 4 switches (events) per day can be implemented.
– To set 2 or 4 events per day: see chapter 8.4.2 "Expert menu ‒ Options" on page 29.
– This setting is located in the "Expert menu". If you are not sure, consult an expert to
make the settings.
Block (Mon ... Fri / Sat - Sun) or daily programming can be implemented.
– To set block or daily: see chapter 8.4.2 "Expert menu ‒ Options" on page 29.
– This setting is located in the "Expert menu". If you are not sure, consult an expert to
make the settings.
Example 1: Block programming and 2-events per block
Fig. 20: Set start times: Block and 2-events per block
Product manual 2CKA001473B9664 │ 01.03.2020
Operation
│26