Operation; Setpoint Adjustment Or Change Of Mode - ABB HA-S-1-WL Product Manual

8

Operation

8.1

Setpoint adjustment or change of mode

Local operation
Radiator thermostat, Basic
Fig. 14: Overview of devices Radiator thermostats (Basic and Comfort)
Basic
[1] LED
[2] Comfort button: for setting the temperature to the
parameterized comfort setting.
[3] OFF button: for deactivating the device
Frost protection is active when the device is
switched off.
Switch the device on via the Comfort button [2]
[4] Temperature sensor (NTC)
The following operating modes are available, which, according to the version, can also be set
locally (see the following table):
Comfort operation
Application: You are in the room for a longer period of time; the comfort temperature is to be
reached. The thermostat aim at the setpoint temperature.
Basic version: Only the mode can be selected on the device (button [2]), however, no local
■
adjustment of temperature.
Comfort version: The display [2] shows the setpoint temperature and "Heating operation".
■
The temperature can be adjusted locally via the handwheel [5].
Product manual 2CKA001473B9364
1
2
3
4
ECO
6
Radiator thermostat, Comfort
Comfort
[1] LED
[2] Display
[3] ECO button: for switching between comfort and
OFF mode.
[4] OFF button: for switching between the last
operating mode and OFF; the last mode can be
either Comfort or OFF mode.
[5] Handwheel
[6] Temperature sensor (NTC)
Operation
1
2
3
4
5
│30