Table of Contents
Advertisement
For your Safety
Safety of people
Wear personal protective equipment and, depending on the work situation,
use:
Ensure other people keep a safe distance from your work area. Any person
entering the work area must be wearing personal protective equipment.
Broken pieces of the workpiece or broken insert tools can fly off and cause injuries,
even outside the immediate work area.
Hold the tool at the insulated gripping surfaces only when carrying out work
during which the insert tool can hit concealed electricity cables or the tool's
own mains power lead.
Contact with a live conductor can also energise metal parts of the tool and cause an
electric shock.
Keep the mains power lead away from rotating insert tools.
If you lose control of the tool, the mains power lead can be cut or caught and your
hand or arm can be pulled into the rotating tool.
8
full-face protection, eye protection or safety glasses/goggles,
hard hat and special apron
Protect yourself against debris thrown up by wearing a hard hat, safety
goggles or face protection and wear an apron, if necessary.
Hearing protection
The typical A-weighted sound pressure level of this power tool is over
85 dB (A) while working with the tool.
If you are exposed to loud noise for lengthy periods, there is a risk of
hearing damage or even hearing loss.
Dust mask, half-face filter mask or face mask respirator
Inhaling fine mineral dust can cause health damage. We recommend
wearing a face mask respirator with filter class P2 or P3
(to EN 149:2001).
The machine may only be used together with an approved dust extrac-
tor (e.g. a special BAIER dust extractor).
Anti-vibration safety gloves
At a release value A (8) for arm-hand vibrations of over 2.5 m/s
wearing of anti-vibration safety gloves is recommended.
Vibrations can cause health damage.
Non-slip safety footwear
2
, the
Advertisement
Table of Contents
