Table of Contents
Advertisement
For your Safety
3) Safety of persons
a)
Always work carefully, attentively and sensibly when using a power tool. Do
not use power tools if you are tired or are under the influence of drugs, alco-
hol or medication.
A moment of inattention while using the power tool can result in serious injuries.
b)
Wear personal protective equipment and always wear goggles.
Use of personal protective equipment, such as dust mask, non-slip safety shoes,
helmet or ear protectors, depending on the type and application of the power tools,
reduces the risk of injuries.
c)
Avoid accidental switching on of the power tool. Ensure that the power tool is
switched off before connecting it to the mains power supply and/or connect-
ing the battery and before picking up or carrying the tool.
If you have your finger on the switch when carrying the power tool or you connect
the tool to the power supply when it is switched on, this can lead to accidents.
d)
Remove the adjusting tools or wrenches before switching on the power tool.
A tool or wrench in a rotating part of the tool can result in injuries.
e)
Avoid abnormal postures when working. Ensure you are standing firmly and
maintain your balance at all times.
This will enable you to control the power tool better in unexpected situations.
f)
Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts.
Loose clothing, jewellery and long hair can get caught in moving parts.
g)
If dust extraction and collection devices can be installed, ensure that these
are connected and are used correctly.
Use of a dust extraction system can reduce the hazards caused by dust.
4) Using and handling the power tool
a)
Do not overload the tool. Use the power tool intended for your work.
You work better and safer within the given power range if you use a suitable power
tool.
b)
Do not use a power tool whose switch is defective.
A power tool which can no longer be switched on or off is dangerous and must be
repaired.
c)
Remove the plug from the plug socket and/or remove the battery before carry-
ing out tool adjustments, changing accessories or placing the tool aside.
This precautionary measure prevent unintentional starting of the power tool.
5
Advertisement
Table of Contents
