Table of Contents
Advertisement
Operation and Control
Switch on façade cutter and cut
Figure 7
• Caution!
Damage to insert tools and gearbox.
► Prevent the machine from "dancing" on hard material and only use sharp insert
tools, as otherwise the insert tools and gearbox can be damaged.
• Always hold the façade cutter firmly with both hands on the handles (1 and 5).
• Position the façade cutter with the side of the guard plate (4) facing towards the
switching handle, so that the insert tools do not touch the surface to be machined.
• Switch on the façade cutter; to do this, press the starting lockout button (2) first, then
press the ON / OFF switch (3) and wait until the machine has reached its full speed.
• Push the running insert tool into the surface to be machined.
• As soon as the guard plate (4) sits completely on the surface, push the machine and
guide it in the required working direction.
(Figure 7)
Finish cutting
• Danger!
Risk of injuries due to after-running of the cutters or grinding discs, after switching off
the façade cutter.
► Always hold the cutters or grinding discs away from your body and wait for them
to completely stop before putting down the façade cutter.
The façade cutter switches off as soon as the ON / OFF switch (3) is released. Do
not put down the façade cutter until the grinding disc has stopped.
20
(Figure 7)
Advertisement
Table of Contents
