Before Starting Work - Baier BFF 222 Original Instructions Manual

Facade cutter/dresser
Table of Contents

Advertisement

Insert Tools and Accessories
• Star-type wheel dresser set
(SF 80 star-type wheel dresser set incl. guard plate)
• Guard plate for star-type wheel dresser and
carbide cutter with indexable inserts
• Replacement star-type wheels
(1 set contains 16 spare star-type wheels)
for star-type wheel dresser
(16 replacement star-type wheels required per star-type wheel dresser)
• Replacement washers
(Washers are required to adjust the cutting depth.)
• BAIER BSS 506 special dust extractor

Before Starting Work

Note and follow the following points before each use to ensure safe working with the
façade cutter:
• Read through all safety instructions and warnings in this instruction manual.
• Check whether the voltage on the rating plate is identical with the mains voltage.
• Before each use, check the machine, connection cable, plug and tight fit of the cut-
ters or grinding discs.
• Use only BAIER cutters and BAIER grinding discs, to ensure adequate safety.
• Use only the insert tools recommended by Maschinenfabrik OTTO BAIER GmbH for
the respective use (see table on page 14).
• Depending on the insert tool, attach the appropriate guard plate (see page 19) and
set the correct cutting depth (see page 18).
• Wear protective clothing such as hard hat, face protection or safety goggles, half-
face filter mask, hearing protection, safety gloves, slip-resistant safety footwear and
if necessary an apron.
• The façade cutter may only be used, either if a dust extractor is connected (see also
next point) or if the socket for connection of the dust extractor hose is closed off with
a cap.
• If materials that produce harmful dusts are cut (e.g. quartz sand, lead-containing
paint pigments, etc.), a suitable dust extractor (e.g. BAIER BSS 506 special dust ex-
tractor) must be connected to the façade cutter.
• Please note!
We can only guarantee the machine's full performance if it is used with the BAIER
BSS 506 dust extractor.
• Danger!
Risk of fire if cable drums used.
► If cable drums are used, ensure the cable is completely unwound. The rolled up
cable can heat up and start to burn.
(ID. No. 60616)
(ID. No. 57463)
(ID. No. 57984)
(ID No. 21071)
(ID. No. 73585)
15

Advertisement

Table of Contents
loading

Table of Contents