Insert Tools And Accessories - Baier BFF 222 Original Instructions Manual

Insert Tools and Accessories

BAIER insert tools for
the BFF 222 façade
cutter/dresser
Diamond grinding disc
(Scope of supply:
2 cutters, right/left-hand,
each with 4 solid dia-
mond segments)
Carbide cutters
(Scope of supply:
2 cutters, right/left-hand,
each with 4 carbide
indexing plates)
Carbide grinding disc
(Scope of supply:
2 cutters, right/left hand)
SF 80 star-type wheel
dresser
(Scope of supply:
2 cutters, right/left-hand,
each with 16 replaceable
carbide start-type
wheels)
Set of carbide cutters
with indexable inserts
(Scope of supply:
2 cutters, right/left-hand,
each with 4 carbide
indexing plates)
Star-type serrated
wheel dresser set
(Scope of supply:
2 cutters, right/left hand)
14
Area of use
For remedial work on hard surfaces:
machining concrete surfaces (e.g. levelling

out concrete-formwork crossovers),
 grinding and remedial work on floors (screed
and industrial floors),
 removing paint (e.g. graffiti on concrete
surfaces),
 roughing steps made of natural stone.
High removal rate from smooth surface:
 cutting plaster, rendering and façade coat-
ings,
 removing carpeting remains, tile adhesive,
etc.
For roughening and rough grinding:
removing heat-sensitive coverings and coat-

ings (e.g. synthetic resin-based paint from
hardwood planks).
For cutting, levelling, rough grinding and derust-
ing:
 removal and levelling out abrasive screed,
 cutting rendering on outdoor walls,
 grinding heat-sensitive materials, e.g. polyes-
ter-based paint in swimming pools,
 roughly grinding off concrete residues and
paint from concrete,
 removing carpeting remains and tile adhe-
sives,
roughly derusting metal surfaces.

Note: Use special guard plate to reduce dust,
see below (ID No. 57463).
For gentle or aggressive removal (carbide index-
ing plates raised):
Defined removal or levelling of soft screed

and plaster,
 scratching off materials that tend to smear,
e.g. oil-based paint in swimming pools and
different types of paint on diverse surfaces,
 removing graffiti.
Note: Working free of fine dust (including lead-
containing materials) is only possible if you use
the guard plate (ID No. 57463).
For roughening natural stone and concrete.
Note: Working free of fine dust is only possible if
you use the guard plate (ID No. 57463).
ID No.
55327
55335
49643
54957
73379
73288