Upgrade; Table 20: Upgrade - Grandstream Networks GWN76 Series User Manual

Upgrade

The Upgrade Web page allows upgrade related configuration.
Field
Authenticate Config File
XML Config File Password
Upgrade Via
Firmware Server
Config Server
Check/Download New Firmware
and Config at Boot
Allow DHCP options 66 and 43
override
Automatic Upgrade
X Hours
Hour of Day (0-23)
Day of Week
Refer to [SCHEDULE] to define time.

Table 20: Upgrade

Description
Authenticates configuration file before acceptance. The default
setting is No.
The password for encrypting the XML configuration file using
OpenSSL. The password is to decrypt the XML configuration file is
it is encrypted via OpenSSL
Allow users to choose the method to load the firmware and config:
TFTP, HTTP or HTTPS.
Define the IP address or URL for the firmware upgrade server.
Make sure all files relevant to the firmware are updated completely
Configure the IP address of URL for the file server.
Configure whether to enable/disable automatic upgrade and
provisioning when reboot.
Enable/Disable DHCP options 66 and 43 to override the upgrade
and provisioning settings
Set automatic upgrade every intervals/day/week. The device will
request to upgrade automatically according to the setup time. The
default setting is Disabled
Select the time period to check for firmware upgrade.
This field is available when select "Check every X Hours" in
"Automatic Upgrade"
Defines the hour of the day (0-23) to check the HTTP/TFTP server
for firmware upgrade or configuration file changes.
This field is available when select "Check at Hour of Day" and
"Check at Day of Week" in "Automatic Upgrade"
Defines the day of the week to check the HTTP/TFTP server for
firmware upgrade or configuration file changes.
This field is available when select "Check at Day of Week" in
GWN76XX User Manual
Version 1.0.15.x
P a g e | 90