Maintenance; Upgrade; Table 33: Upgrade - Grandstream Networks GWN76 Series User Manual

Maintenance

Upgrade

The Upgrade Web page allows upgrade related configuration.
Field
Upgrade Protocol
Allow DHCP options 66 and 43
override
Check/Download New Firmware
and Config at Boot
Reboot
Factory Reset
Firmware Server
Upgrade Now
Automatic Upgrade
X Hours
Hour of Day (0-23)
Day of Week

Table 33: Upgrade

Description
Allow users to choose the method to load the firmware and config:
TFTP, HTTP or HTTPS.
Enable/Disable DHCP options 66 and 43 to override the upgrade
and provisioning settings
Configure whether to enable/disable automatic upgrade and
provisioning when reboot.
Click on button to reboot device.
Click on to restore the device and all online APs to
factory default settings.
Define the IP address or URL for the firmware upgrade server.
Make sure all files relevant to the firmware are updated completely.
Click on button to begin the upgrade. Note that the
device will reboot after downloading the firmware.
Set automatic upgrade every intervals/day/week. The device will
request to upgrade automatically according to the setup time. The
default setting is Disabled
Select the time period to check for firmware upgrade.
This field is available when select "Check every X Hours" in
"Automatic Upgrade"
Defines the hour of the day (0-23) to check the HTTP/TFTP server
for firmware upgrade or configuration file changes.
This field is available when select "Check at Hour of Day" and
"Check at Day of Week" in "Automatic Upgrade"
Defines the day of the week to check the HTTP/TFTP server for
firmware upgrade or configuration file changes.
GWN76XX User Manual
Version 1.0.19.25
P a g e | 119