Ap Location - Grandstream Networks GWN76 Series User Manual

Note
If a GWN76XX is not being discovered or the pair icon is grey color, make sure that it is not being paired
with another GWN76XX Access Point acting as Master Controller, if yes users will need to unpair it first,
or reset it to factory default settings in order to make it available for pairing by other GWN76XX Access
Point Controller

AP Location

GWN supports a handy feature which allows users to locate other Access points by blinking LED. To use
the feature, navigate on the master web GUI under "Access Points" page and click on the icon
the desired AP, and it corresponding unit will start blinking the LEDs.
•
Enable Short Guard Interval: Check to activate this option to
increase throughput.
•
Active Spatial Streams: Choose active spatial stream if Auto, 1 or
2 streams.
•
Radio Power: Set the Radio Power, it can be Low, Medium or High.
•
Custom Wireless Power(dBm): allows users to set a custom
wireless power for both 5GHz/2.4GHz band, the value of this field
must be between 1 and 31.
•
Allow Legacy Devices(802.11b): Check to support 802.11b devices
to connect the AP in 802.11n/g mode.
•
Dynamic Channel Assignment: Once enabled, AP will try to
allocate and move the best channel during operation, unlike Auto
Channel Selection (ACS) which scan and assign channel when Wi-
Fi interface goes up for one time. This feature is not supported on
GWN7610, GWN7630 or GWN7630LR.
•
Transmit Power Control: TPC algorithm runs every 10 minutes. AP
acquires the RSSI information of the neighbor by wireless scanning
and establishes the neighbor table. The algorithm requires that there
must be at least 3 neighbor APs with RSSI larger than -70dbm.
Otherwise, power will not be adjusted. This feature is not supported
on GWN7610, GWN7630 or GWN7630LR.
•
Coverage Hole Detection: CHD enables AP to decide whether to
increase the AP power by the current SNR and SNR threshold of the
connected clients. This feature is not supported on GWN7610,
GWN7630 or GWN7630LR.
GWN76XX User Manual
Version 1.0.15.x
near
P a g e | 54