Pilz PSSnet GW1 MOD­-CAN Operating Manual page 8

Overview
2.2 Unit view
2.2.1 Front
Fig.: Front view
: LEDs for displaying the communication status and faults
: Rotary switch DR for setting the transmission rate
: Rotary switch X10 for setting the tens digit of the device address; this is the address
used to address the Gateway of the CANopen Master. This address must be set in the soft­
ware for the CANopen Master
: Rotary switch X1 for setting the units digit of the device address for this Gateway
: CANopen interface (male 9­pin D­Sub connector)
: Barcode with the item number, serial number and version of the Gateway
: MAC address
: 2D code with the MAC address
Operating Manual PSSnet GW1 MOD­CAN
1002693­EN­03
22,5 (0,88")
8