Web Server; Call Web Server; Password Management - Pilz PSSnet GW1 MOD­-CAN Operating Manual

Operation
LED
Run/Err
7.2 Web server
A web server is implemented within the Gateway; it is started once the Gateway is connec­
ted to the supply voltage.
The web server is intended for use with Internet Explorer or Firefox.
Make sure that Javascript and Cookies are enabled in your browser's security settings.
7.2.1 Call web server
1. Connect the Gateway to the PC.
2. Call up the following HTML page:
–
–
3. Enter the user name and password correctly and log on to the web server.
4. Select the option you require from the options in the overview and then follow the in­
structions.
7.2.2 Password management
} For access to the web server, two users have been preset in its delivery condition.
Users
User
User
}
Access without a password is not possible.
}
User names and passwords can be changed.
Operating Manual PSSnet GW1 MOD­CAN
1002693­EN­03
LED status
1
1
2
3
http://192.168.0.xxx
For xxx, enter the value that you have set as the last byte of the IP address.
Access type
Read access only
Read and write access
Meaning
Green Gateway in "Operational" status
Green Gateway in "Stopped" status
Green Gateway in "Pre­Operational" status
Red CAN controller is in "Bus Off" status
Red Error threshold value has been reached, the
CAN controller has received too many error
telegrams
Red Monitoring error, activation of master­slave
monitoring, e.g. heartbeat monitoring
Red Error in "Synchronisation" status. A synchron­
isation telegram, e.g. to write simultaneously
on several devices, did not occur within the
configured time.
No supply voltage
Password
1111
0000
37