Page 1
RBP-1128B-RX3 RBP-1128SS-RX3 2019 CHEVY SILVERADO 1500 DOUBLE CAB RX3 Driver/Left Passenger/Right Bracket Bracket Passenger/Right Front Driver/Left HARDWARE INCLUDED RECOMMENDED TOOLS Driver/Left Side RX3 Step 8mm Lock Washers 13mm Socket or Wrench Passenger/Right Side RX3 Step 8mm x 24mm x 2mm Flat Washers...
Page 2
RBP-1128B-RX3 RBP-1128SS-RX3 DRIVER-LEFT SIDE INSTALLATION: STEP 1 – Move vehicle to a level location. Remove any old steps and hardware. STEP 2 – Start the installation under the Driver/Left side of the truck. Locate the threaded mounting holes along the bottom edge of the body, (Figure 1).
Page 3
RBP-1128B-RX3 RBP-1128SS-RX3 Front Factory 8mm threaded insert in body panel (Fig. 2) Driver/Left front mounting location (Fig. 3) Driver/Left mounting bracket 8mm hex bolts 8mm lock washers 8mm flat washer Fig. 4 Front (Fig. 5) Driver/Left bracket mounted Page 3 of 4 4/17/19(AL) 13000 Temple Ave.
Page 4
RBP-1128B-RX3 RBP-1128SS-RX3 Factory 8mm threaded insert in body panel Factory 8mm threaded insert in body panel Front (Fig. 6) Driver/Left 2nd mounting location Rear Factory 8mm threaded insert in body panel (Fig. 7) Driver/Left 3rd mounting location (Fig. 8) Driver/Left rear mounting location Front Fig.
Need help?
Do you have a question about the RX3 Series and is the answer not in the manual?
Questions and answers