Panasonic ES‑LV9Q Operating Instructions Manual page 25

Problem
Makes a loud sound.
►Shaver
Problem
The power switch does
not turn ON.
The clean lamp ( ) glows.
(It turns off in about
1 minute.)
ES-LV9Q_EU.indb 25
Action
During cleaning:
The self‑cleaning recharger
makes a loud sound due to
the cleaning of the blades.
After cleaning:
The self‑cleaning recharger
makes a loud sound due to
the removal of water droplets
in order to speed drying.
The sound after cleaning is
different from the sound during
cleaning. The water level has
dropped and it is removing
water droplets from the blades
after cleaning. This does not
indicate a problem.
Action
The appliance may not unlock
depending on usage conditions.
Place the appliance on the
desk, then pick it up again. If it
still does not operate, press and
hold the power switch for more
than 2 seconds to forcibly
unlock the appliance.
Please clean the blades with the
self‑cleaning recharger or the
sonic vibration cleaning mode.
Problem
Depending on the beard
thickness or the amount of beard
trimmings in the shaver head,
the shaving sensor may not react
and the driving sound may not
change. This is not abnormal.
The shaving sensor may not
respond depending on the type
and quantity of the shaving gel.
The shaving sensor
This is not abnormal.
does not respond.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Apply oil. (See page 19.)
The shaving sensor may not
respond when there is not
enough oil on the blades.
Action
25
2017/12/22 9:13:20