Replacing The System Outer Foil And The Inner Blades - Panasonic ES‑LV9Q Operating Instructions Manual

Cleaning with the brush
Remove the outer foil section and the inner blades.
(See this page.)
►Cleaning with the long brush
Clean the outer foil section
[A9], system outer foil [A2],
the shaver body [A] and the
trimmer [A<] using the long
brush.
►Cleaning with the short brush
• Clean the inner blades [A;] using
the short brush by moving it in
direction as illustrated.
• Do not move the short brush
perpendicularly against the blades
as it will damage the inner blades
and affect their sharpness.
Replacing the system outer foil and
the inner blades
appears on the lamp display once a year. (Based on one
3‑minute shave use per day)
We recommend checking the system outer foil and the inner
blades when it appears.
Press the power switch for more than 30 seconds to turn off
Even if is not turned off right after the replacement, it will
automatically turn off within approximately 7 uses.
system outer foil once every year
inner blades once every two years
20
ES-LV9Q_EU.indb 20
►Removing the outer foil section
Press the foil frame release buttons [A5] and
lift the outer foil section [A9] upwards.
►Attaching the outer foil section
After turning the foil frame mark (
front, securely attach the outer foil section [A9]
to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release buttons
[A:] and pull down the system outer foil
[A2].
• Do not press the system outer foil release
buttons with excessive force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
2. Align the foil frame mark (
mark ( ) and securely attach together until it clicks.
►Replacing the inner blades
1. Remove the inner blades [A;] one at a time.
2. Insert the inner blades one at a time.
.
Note
Do not throw away the foil frame.
) to the
) and the system outer foil
2017/12/22 9:13:19