Network Settings; Lan; Figure 3.4 Network Settings > Lan - Advantech EKI-6333AC-M12 Series User Manual

3.3

Network Settings

3.3.1

LAN

To access this page, click Network Settings > LAN.
The following table describes the items in the previous figure.
Item
Local Hostname
Network mode
IP Address
Subnet Mask
Default Gateway
Primary DNS Server
Secondary DNS Server Enter a value to specify the secondary DNS server for the
MAC Address
DHCP Server
Start IP Address
Pool Counter
Leasetime
Submit
Note! All new configurations will take effect after rebooting. To reboot the
device, click Administration > Tools > Reboot.
EKI-6333AC-M12 Series User Manual
Figure 3.4 Network Settings > LAN
Description
Enter the device name: up to 31 alphanumeric characters.
Click the drop-down menu to select the IP Address Setting mode:
Static or DHCP client.
Enter a value to specify the IP address of the interface. The default
is 192.168.1.1.
Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Enter a value to specify the default gateway for the interface.
Enter a value to specify the primary DNS server for the interface.
interface.
Display the MAC address to which packets are statically
forwarded.
Select Enabled or Disabled to designate the DHCP server
function type. When a new DHCP server mode is selected, the
switch requires a system restart for the new mode to take effect.
Enter starting a IP address for the IP assignment.
Enter a variable to define the number of IP addresses for a given
network.
Enter in the value designating the lease time for the DHCP server.
Click Submit to save the values and update the screen.
19