Figure 3.10 Wireless Settings > Wlan > Access Control - Advantech EKI-6333AC-M12 Series User Manual

Item
Tx packets/bytes
Rx packets/bytes
Wlan status
TX packets
TX bytes
RX packets
RX bytes
3.4.2.5 Access Control
The Access Control feature is only available when the wireless mode of the device is
set to AP, see "Basic" on page 20.
Access Control allows for an administrator to allow or deny access by defining
specific devices through their MAC address.
To access this page, click Wireless Settings > WLAN > Access Control.
Figure 3.10 Wireless Settings > WLAN > Access Control
The following table describes the items in the previous figure.
Item
Access Control Method Click the drop-down menu to set the access control method:
Submit
EKI-6333AC-M12 Series User Manual
Description
Displays the total Tx packets and corresponding bytes.
Displays the total Rx packets and corresponding bytes.
Display the current Tx packets.
Display the current Tx bytes.
Display the current Rx packets.
Display the current Rx bytes.
Description
Disable, Deny or Allow.
In the Deny or Allow menu, enter the MAC address of the target
device - support for up to 32 target devices.
Click Submit to save the values and update the screen.
23