Download Print this page

Advertisement

Quick Links

Hampton Bay Lifetime Limited Warranty
The retailer warrants the fan motor to be free from defects in workmanship and material
present at time of shipment from the factory for a lifetime after the date of purchase by the
original purchaser. The retailer also warrants that all other fan parts, excluding any glass or
plexiglass blades, to be free from defects in workmanship and material at the time of
shipment from the factory for a period of one year after the date of purchase by the original
purchaser. We agree to correct such defects without charge or at our option replace with a
comparable or superior model if the product is returned to the retailer. To obtain warranty
service, you must present a copy of the receipt as proof of purchase. All costs of removing
and reinstalling the product are your responsibility. Damage to any part such as by accident
or misuse or improper installation or by affixing any accessories, is not covered by this
warranty. Because of varying climatic conditions in the United States this warranty does not
cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling.
Brass finishes of this type give their longest useful life when protected from varying weather
conditions. A certain amount of wobble is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no
other express warranty.
including but not limited to. Those of merchantability and fitness for a particular
purpose to the extent permitted by law. The duration of any implied warranty which
cannot be disclaimed is limited to the time period as specified in the express warranty. Some
states do not allow limitation on how long an implied warranty lasts, so the above limitation
may not apply to you. The retailer shall not be liable for incidental, consequential, or
special damages arising out of or in connection with product use or performance except
as may otherwise be accorded by law. Some states do not allow the exclusion of incidental
or consequential damages, so the above exclusion or limitation may not apply to you. This
warranty gives specific legal rights, and you may also have other rights which vary from
state to state. This warranty supersedes all prior warranties.
The retailer hereby disclaims any and all warranties,
Lifetime Limited Warranty
Date Purchased
Store Purchased
Model No.
Serial No.
Vendor No.
792145351368
UPC
567-472
14826

Advertisement

loading

Summary of Contents for HAMPTON BAY 567-472

  • Page 1 Hampton Bay Lifetime Limited Warranty The retailer warrants the fan motor to be free from defects in workmanship and material Date Purchased present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser.
  • Page 2: Table Of Contents

    Safety Rules............................. Unpacking Your Fan ......................... Installing Your Fan ........................... Installing the Light Kit........................Operating Your Fan .......................... Care of Your Fan ..........................Troubleshooting ..........................Specifications ..........................Table of Contents...
  • Page 3: Safety Rules

    1. To reduce the risk of electric shock, insure electricity has been turned Avoid placing objects in the path of the blades. off at the circuit breaker or fuse box before beginning. 9. To avoid personal injury or damage to the fan and other items, be 2.
  • Page 4: Unpacking Your Fan

    Unpack your fan and check the contents. You should have the following items; 1. Fan blades (5) Light kit 12. Loose parts bag containing: a. Mounting hardware Glass shades Canopy assembly Screws (2 PCs. ) Ball/downrod assembly Pull chain and fob (2) Lock washers (2 PCs.) 4.
  • Page 5: Installing Your Fan

    Figure 4 Figure 2 To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar as shown in Figure 4 (available at your Hampton Bay Retailer). 3. Installing Your Fan...
  • Page 6 careful not to Jam the pin against the wiring STANDARD CEILING Hanging the Fan inside the downrod. Insert the locking pin INSTALLATION through the hole in locked position, as noted 1.Remove the canopy ring from the canopy by REMEMBER to turn off the power. Follow in the circle inset of Figure 6A.
  • Page 7 CLOSE-TO-CEILING INSTALLATION WARNING UL Listed Mounting electrical FAILURE TO COMPLETELY TIGHTEN screws 1. Remove the canopy ring from the canopy by (supplied with THE THREE SCREWS IN STEP 9 COULD electrical box) turning the ring until it unlocks. (Fig. 5) RESULT IN FAN LOOSENING AND POSSIBLY FALLING 2.
  • Page 8 Step 5 Turn the connecting nuts upward and push the wiring into the outlet box. Figures 10 and 11 illustrate the wiring connections for optional wall control (available at your Hampton Bay Retailer, WHITE BLUE the wire color out of wall control may vary, see wall control's...
  • Page 9 Installation of Safety Finishing the SUPPLY CIRCUIT Support Installation Ground Conductor Light n additional safety support is provided to STANDARD CEILING INSTALLATION prevent the fan from falling. Secure the safety Outlet Box Slide canopy up to the ceiling as shown in cable to the ceiling joist with screw and washer, Green Figure 13 leaving a 1/8"...
  • Page 10 Attaching the Fan Screws Blade Blades Step 1 Attach blades to blade arms using three Allow 1/8" Rubber Clearance screws and rubber washers as shown in Figure washer 15. Start a screw into the bracket, do not tighten. Repeat for the 2 remaining screws and washers. Blade Figure 15 Step 2 Tighten each screw securely starting...
  • Page 11 All blades are grouped by weight. Because 3. Use the enclosed Blade Balancing Kit if natural woods very in density, the fan may the blade wobble is still noticeable. wobble even though the blades are weighed Touching ceiling equally. 4. If the blade wobble is still noticeable, interchanging two adjacent (side by side) The following procedure should correct most blades can redistribute the weight and...
  • Page 12: Installing The Light Kit 10

    NOTE: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at fuse box. Turning power off using the fan switch is not sufficient to prevent electric shock. While holding the light kit under your fan, ocate two single white and blue wires in the switch housing labeled "FOR LIGHT".
  • Page 13: Operating Your Fan

    Fan Without Light Kit NOTE WAIT FOR FAN TO STOP BEFORE (Optional) CHANGING THE SETTING OF THE SLIDE SWITCH. Your fan is designed with light kit, we also prepare a switch housing cover for your Turn on the power and check the operation of choice in case you intend to install the fan your fan.
  • Page 14: Care Of Your Fan 12

    Here are some suggestions to help you maintain 3. You can apply a light coat of furniture polish to the your fan wood blades for additional protection and enhanced beauty. Cover small scratches with a light 1.Because of the fan's natural movement, some application of shoe polish.
  • Page 15: Troubleshooting

    Problem Solution Fan will not start. 1.Check circuit fuses or breakers. 2. Check line wire connections to the fan and switch wire connections in the switch housing. CAUTION: Make sure main power is off. Fan sounds noisy. 1. Make sure all motor housing screws are snug. 2.
  • Page 16: Specifications 14

    These are approximate measures. They do not include Amps and Wattage used by the light kit. Distributed by/ Home Depot of Canada Inc. 900-1 Concorde Gate Toronto, Ontario M3C 4H9 2006 Homer TLC, Inc. All Rights Reserved Hampton Bay is a registered trademark of Homer TLC, Inc. Specifications 14.