Installing an Interface Module
Installing an Interface Module
Procedure
Step 1
Before inserting an interface module, make sure that the chassis is grounded.
Step 2
To insert the interface module, carefully align the edges of the interface module between the upper and lower
edges of the router slot.
Step 3
Carefully slide the interface module into the router slot until the interface module makes contact with the
backplane. The following figure shows how to install the interface module.
Note
Figure 14: Inserting an Interface Module
Installing the Cisco ASR 914 Router
22
Ensure that none of the slots remain empty, else insert the filler trays (A900-IMA-FILLER) in the
respective slots.
Installing the Cisco ASR 914 Router