Cisco ASR 914 Manual page 17

Hide thumbs Also See for ASR 914:

Table of Contents

Installing the Cisco ASR 914 Router

Removing Fan 3

Procedure

Step 1

Using a No. 2 Phillips screwdriver or your fingers, loosen the captive installation screw that secures the fan

tray to the chassis.

Step 2

Grasp the fan tray handle with one hand and pull out.

Caution

Step 3

Pull the fan tray toward you no more than 1 inch to disengage it from the power receptacle on the midplane,

as shown in the following figure.

The fans are exposed on the right side of the fan tray. Keep your fingers, clothing, and jewelry away

from the fans. Always handle the fan tray by the handle.

Removing Fan 3

Installing the Cisco ASR 914 Router

Table of Contents