Receiving And Handling The Product - DeLonghi CLIMAVENETA HED HCAT 0011 SE Installation And Service Manual

IDENTIFICATION
The HCAT SE condenser units can be identified by the:
Packaging label
Giving the data identifying the product.
Rating plate
Giving the technical and performance data of the unit.
If lost, ask the After Sales Service for a duplicate.

RECEIVING AND HANDLING THE PRODUCT

The HCAT SE condenser units are supplied accompanied by:
- instruction manual;
- guarantee certificate;
- CE declaration.
These are contained in a plastic bag (A) attached to the
top of the unit.
The unit should always be handled by qualified personnel
using equipment adequate for the weight of the condenser
unit. If a forklift truck is used, insert the forks under the
bed plate, spacing the forks as wide apart as possible.
If a crane is used, pass the cables through the bottom of
the bed plate, making sure they do not exert pressure on
the unit. Once the packaging has been removed, the unit
can be lifted and moved by inserting two metal tubes (max.
diameter: 1/2") into the feet provided for this purpose and
using suitable handling equipment.
Size
Dimension L
Dimension P
Dimension H
Gross Weight
14
ENGLISH
0011-0021-0031
1060
460
880
80
HED-HCAT SE FREE COOLING
De' Longhi S.p.a. - 31100 Treviso / Italia
Via L.Seitz, 47 - tel. 04224131 fax 0422413659
MODELLO:
TENSIONE:
CODICE:
POTENZA FRIGORIFERA ------------------- kW
POTENZA TERMICA ------------------- kW
TIPO REFRIGERANTE -------------------
CARICA REFRIGERANTE ------------------- Kg
PRESSIONE MASSIMA ------------------- bar
ALIMENTAZIONE ELETTRICA DI POTENZA ------------------- V---Hz
ALIMENTAZIONE ELETTRICA AUSILIARI ------------------- V---Hz
POTENZA ELETTRICA MAX. ASSORBITA ------------------- kW
CORRENTE MAX. ASSORBITA ------------------- A
CORRENTE DI SPUNTO ------------------- A
SCHEMA ELETTRICO ------------------- N°
PESO IN FUNZIONAMENTO ------------------- Kg
ANNO DI FABBRICAZIONE -------------------
The instruction manual is an integral part of the
unit and should thus be read and kept carefully.
Do not dispose of packaging materials in the
environment or leave them within reach of children
as they may represent a hazard.
The weight of the condenser unit is biased
towards the compressor side (side of the packaging
with the bar code, see figure at the foot of the page).
During transport, the condenser unit must be
kept in the vertical position.
Bar
CODICE
Code
A BARRE
I
Tampering with or
the removal or ab-
sence of rating plates or
other means enabling the
unit to be identified causes
problems during installa-
tion and maintenance.
I
A
0041-0051-0061
1060
460
980
87
A
A